If you are having trouble connecting your BL2 to your iOS device, please watch the video here or follow the steps below:

Step 1 - Turn ignition OFF and remove Key.

Step 2 - Ensure your Bluetooth is ON by going to Settings then clicking on Bluetooth and ensuring it is ON

Step 3 - Insert the Blue-Link 2 by Matching the 9-pin or OBD connector to the Diagnostics port of the truck. Make sure it is fully seated in the port.

Step 4 - Insert Key and Turn Ignition to ON position with Engine OFF

Step 5 - Press and hold down the button on the front of the Blue-Link 2 until the Green Light next to the button starts flashing blue indicating the Blue-Link 2 is in Pairing Mode.

Step 6 - Open up the OTR Diagnostics Application and wait for a Bluetooth Pairing Request to be displayed, Once the request is displayed select pair.

NOTE: If pairing request is not displayed. Please start over at Step 1

Step 7 - Application will continue through connection process until fully connected to vehicle.

NOTE: If Unit does not connect please start over at step 1

If you need further assistance, contact our support team via email at [email protected] or by calling/texting 586-799-4375.

***The pairing instructions for both iOS and Android can be downloaded here.