Skip to main content
All CollectionsTechnical Assistance
Android Pairing Assistance - BL2
Android Pairing Assistance - BL2
Updated over 3 months ago

If you are having trouble connecting your BL2 to your Android device, please follow the steps below or download the manual here.

Pairing with Blue-Link 2

Step 1 - Turn ignition OFF and remove Key.

Step 2 - Go to Settings, Select Connections, and make sure Bluetooth is ON

Step 3 - Insert the Blue-Link 2 by Matching the 9-pin or OBD connector to the Diagnostics port of the truck. Make sure it is fully seated in the port.

Step 4 - Insert Key and Turn Ignition to ON postion with Engine OFF

Step 5 - Press and hold down the button on the front of the Blue-Link 2 until the Green Light next to the button starts flashing blue indicating the Blue-Link 2 is in Pairing Mode.

Step 6 - Expand Bluetooth options, Under Available devices select the Blue_Link 2 Device. It will be displayed as BL_ Followed by the serial Number of your Blue-Link 2.

NOTE: If Bl_XXXXX does not appear please start over at step 1

Step 7 - Open up the OTR Diagnostics Application and allow it to connect.

NOTE: If Unit does not connect please start over at step 1

If you need further assistance, contact our support team via email at [email protected] or by calling/texting 586-799-4375.

***The pairing instructions for both iOS and Android can be downloaded here.

Did this answer your question?